Square Installation Guide

SQUARE INSTALLATION GUIDE

1. Clean the entire surface with a degreaser such as TSP (Trisodium Phosphate). It is not recommended to use dish soap for washing the walls.

2. To determine your desired Smart Tiles pattern, we recommend laying out the tiles on your countertop or work surface before installing them on the wall.

3. Mark your wall with a level line at the height of the first row of tiles to indicate where the top of your tile should align.

4. On the first tile of the row, trim off the excess on the left side using a precision knife.

5. Remove the protective film from the back of the tile. Our adhesive technology is designed not to stick to your skin. Avoid touching the adhesive with your fingers during installation.

6. Apply the tile to the wall using the guide line. Reposition the tile as needed during installation, then press firmly once it is properly positioned.

7. Apply the remaining tiles one after another, making sure to properly align the tiles, patterns, and grout lines.

8. Repeat the process across the entire wall, trimming the ends at the beginning and end of each row as shown in Step 4.

9. After 48 hours, the installation becomes permanent. You’re now ready to enjoy your new décor for years to come!

Note : The printed letters/numbers on the Smart Tiles are for manufacturing purposes only. To determine the desired pattern, we recommend arranging the tiles on the counter before installing them on the wall. When aligning your tiles, make sure to overlap the letters/numbers along the grout lines to ensure they are not apparent. 

About our Smart Adhesive : Our specially engineered adhesive doesn't feel sticky? That's simply because it isn't meant to stick to your skin! We formulated it so it allows you to reposition the tiles during installation and it will set firmly onto the wall within 48 hours after being stuck to your surface. So as much as it is possible, do not touch the adhesive with your fingers while installing, press firmly once the tile is in the right spot and you'll be set for years of enjoyment with your new decor!

For the fireplace mantel: The SQUARE can be installed on a surface with a temperature not exceeding 49°C (120°F). It is important to avoid any direct contact with a heat source or direct exposure to an open flame.