Free shipping on orders over 69$

Last Chance: Up to 80% Off



 SMART TILES WARRANTY

 

Our Smart Tiles peel and stick tiles will remain securely attached to your wall for as long as you desire, that's our promise!

If by any chance a Smart Tiles were to present a defect, we will replace it after assessing the situation and according to the following conditions:

  • Provide proof of purchase (such as an invoice or a receipt)
  • Provide the batch number*

 

This warranty also covers any potential design or manufacturing defects.

 

For the warranty to be applicable, the following conditions apply:

  • The claim must comply with the terms specified in our Terms and Conditions under the "Warranty" paragraph.
  • The installation surface matches the surfaces specified by Smart Tiles (see FAQ).
  • The installation surface has been properly prepared in accordance with the prerequisites provided by Smart Tiles (see FAQ).
  • A period of three (3) weeks has been respected between the last paint layer of the installation surface and the application of the Smart Tiles.
  • The installation has been done when the Smart Tiles are at room temperature (18°C to 35°C – 65°F to 95°F).
  • The installation has been done in a room with a room temperature of 18°C to 35°C – 65°F to 95°F.
  • The Smart Tiles are not directly exposed to steam, nor in direct contact with a heat source, nor submerged in water. For example, Smart Tiles should not be installed in a sauna or fireplace.
  • If the Smart Tiles are installed behind a stove without a protective panel or metal cover, a space of 20 centimeters (8 inches) has been left in accordance with the installation prerequisites.
  • The Smart Tiles are positioned to avoid any contact with open flames in accordance with the installation prerequisites.
  • The Smart Tiles are not exposed to a temperature exceeding 49°C (120°F).
  • A space of 6 centimeters (2 inches) has been always maintained between your Smart Tiles and a heat source such as a toaster oven.
  • When maintaining the Smart Tiles, Smart Tiles recommendations have been followed, namely the use of a mild non-abrasive product and under no circumstances strong cleaners or chemicals.

 

*You can find the batch number on the side of the tile.



 SMART TILES PANELS WARRANTY

 

Lifetime Warranty Against Manufacturing Defects

If a panel presents a manufacturing defect, we commit to replacing it — after evaluation in accordance with the following conditions:
A valid proof of purchase must be provided;
The panel must have been installed according to our guidelines and under the recommended conditions.

For the warranty to apply, the following conditions must be met:

  • The installation surface matches the materials specified by Smart Tiles (see FAQ).
  • The installation surface was properly prepared, in accordance with Smart Tiles’ prerequisites (see FAQ).
  • A minimum of three (3) weeks must have elapsed between the application of the final coat of paint and the installation of Smart Tiles panels.
  • The panels were installed at room temperature (between 18°C and 35°C / 65°F and 95°F).
  • Installation took place in a room with an ambient temperature between 18°C and 35°C (65°F to 95°F).
  • Panels are not directly exposed to steam, in direct contact with a heat source, or submerged in water. For example, they must not be installed in a sauna or fireplace.
  • If installed behind a stove without a protective panel or metal cover, a clearance of at least 20 cm (8 inches) was maintained, in accordance with installation guidelines.
  • Panels are installed in a way that avoids contact with open flames.
  • Panels are not exposed to temperatures exceeding 140°C (284°F).
  • A minimum distance of 6 cm (2 inches) must be maintained at all times between the panels and any heat source, such as a toaster oven.
  • During cleaning, Smart Tiles’ care recommendations were followed, including the use of mild, non-abrasive products, and no use of harsh cleaners or chemicals.

The warranty excludes any shade or color variations and is limited to the replacement of defective goods or a refund of the purchase price paid, at the sole discretion of Quinco & Cie Inc.

Defects or product non-conformities must be reported by the buyer within ten (10) days of discovery, along with a description of the issue and proof of purchase.